|
ProFIT 0286178 Screw, #8 Thread, 3 in L, Coarse Thread, Bugle Head, Phillips Drive, Sharp Point, Pho
Product Details
Applicable Materials: Drywall
Drive Type: Phillips
Finish: Phosphate
Head Type: Bugle
Length: 3 in
Point Type: Sharp
Thread Size: 8
Thread Type: Coarse
Type: All-Purpose
View Details
|
7035967 |
ProFIT 0286178 Screw, #8 Thread, 3 in L, Coarse Thread, Bugle Head, Phillips Drive, Sharp Point, Pho |
2 |
6.99 |
/ BX |
0286178 |
|
|
Simpson Strong-Tie Strong-Drive SD SD10112R100 Connector Screw, #10 Thread, 1-1/2 in L, Serrated Thr
PRODUCT OVERVIEW
The Strong-Drive(R) SD connector screw is specifically designed to replace nails in certain Simpson Strong-Tie(R) connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie(R) products. In certain applications screws are easier and more convenient to install than nails and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions.
Product Details
Applicable Materials:Wood
Drive Size:1/4 in
Drive Type:Hex
Finish:Galvanized
Grade:Class 55
Head Type:Hex
Includes:Hex Driver
Length:1-1/2
Material:Steel
Package Quantity:100 PK
Point Type:Sharp
Thread Length:1-1/8 in
Thread Size:10
Thread Type:Serrated
Features
Tested and approved for use in many of Simpson Strong-Tie(R) top-selling connectors for both interior and most exterior applications
Ideal for use in connector applications where more control is desired or using a hammer is inconvenient
1/4 in hex head with 0.37 in Dia integrated washer reduces cam-out and is stamped with the Simpson Strong-Tie(R) "a? " sign and the fastener size for easy identification after installation
Shank is specifically designed to match the fastener holes in Simpson Strong-Tie(R) connectors
Optimized heat-treating for ductility and strength
Mechanically galvanized, Class 55 coating meets the requirements for use in preservative-treated and fire-retardant-treated-wood per the 2012 and 215 IRC
View Details
|
7502081 |
Simpson Strong-Tie Strong-Drive SD SD10112R100 Connector Screw, #10 Thread, 1-1/2 in L, Serrated Thr |
8 |
15.99 |
/ BX |
SD10112R100 |
|
|
Simpson Strong-Tie Strong-Drive SD SD10212R100-R Screw Anchor, #10 Dia, 2-1/2 in L, Steel, Galvanize
PRODUCT OVERVIEW
The Strong-Drive(R) SD connector screw is specifically designed to replace nails in certain Simpson Strong-Tie(R) connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie(R) products. In certain applications screws are easier and more convenient to install than nails and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions.
Product Details
Color:Silver
Diameter:10
Drive Type:Hex
Finish:Galvanized
Head Type:Hex
Includes:Hex Driver Bit
Length:2-1/2
Material:Steel
Thread Length:1 in
Features
Tested and approved for use in many of Simpson Strong-Tie(R) top-selling connectors for both interior and most exterior applications
Ideal for use in connector applications where more control is desired or using a hammer is inconvenient
1/4 in hex head with 0.37 in Dia integrated washer reduces cam-out and is stamped with the Simpson Strong-Tie(R) "a? " sign and the fastener size for easy identification after installation
Shank is specifically designed to match the fastener holes in Simpson Strong-Tie(R) connectors
Optimized heat-treating for ductility and strength
Mechanically galvanized, Class 55 coating meets the requirements for use in preservative-treated and fire-retardant-treated-wood per the 2012 and 215 IRC
View Details
|
7502099 |
Simpson Strong-Tie Strong-Drive SD SD10212R100-R Screw Anchor, #10 Dia, 2-1/2 in L, Steel, Galvanize |
4 |
19.99 |
/ BX |
SD10212R100-R |
|
|
Simpson Strong-Tie Strong-Drive SD SD8X1.25-R Screw, #8 Thread, 1-1/4 in L, Serrated Thread, Wafer H
PRODUCT OVERVIEW
Interior wood screws provide fastening solutions that ensure a safer, stronger indoor living environment. The versatile wafer head screw is designed for general wood-to-wood fastening where its pull-through resistance is an advantage. This versatile screw features a sharp-point for easy installation and is ideal for everything from cabinetry to framing.
Product Details
Applicable Materials:Wood
Drive Size:2
Drive Type:Phillips
Finish:Zinc
Head Type:Wafer
Length:1-1/4
Material:Steel
Package Quantity:100 PK
Point Type:Sharp
Thread Size:8
Thread Type:Serrated
Features
Deep #2 Phillips drive makes driving secure and easy
Type-17 point for fast starts
Clear zinc finish for corrosion resistance, for information on corrosion, materials and coatings
View Details
|
7502115 |
Simpson Strong-Tie Strong-Drive SD SD8X1.25-R Screw, #8 Thread, 1-1/4 in L, Serrated Thread, Wafer H |
9 |
14.55 |
/ EA |
SD8X1.25-R |
|
|
Simpson Strong-Tie Strong-Drive SD SD9112R100 Connector Screw, #9 Thread, 1-1/2 in L, Hex Head, Serr
PRODUCT OVERVIEW
The Strong-Drive(R) SD connector screw is specifically designed to replace nails in certain Simpson Strong-Tie(R) connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie(R) products. In certain applications screws are easier and more convenient to install than nails and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions.
Product Details
Applicable Materials:Wood
Drive Size:1/4 in
Drive Type:Hex
Finish:Galvanized
Grade:Class 55
Head Type:Hex
Includes:Hex Driver
Length:1-1/2
Material:Steel
Package Quantity:100 PK
Point Type:Sharp
Thread Length:1-1/8 in
Thread Size:9
Thread Type:Serrated
Features
Tested and approved for use in many of Simpson Strong-Tie(R) top-selling connectors for both interior and most exterior applications
Ideal for use in connector applications where more control is desired or using a hammer is inconvenient
1/4 in hex head with 0.37 in Dia integrated washer reduces cam-out and is stamped with the Simpson Strong-Tie(R) "?" sign and the fastener size for easy identification after installation
Shank is specifically designed to match the fastener holes in Simpson Strong-Tie(R) connectors
Optimized heat-treating for ductility and strength
Mechanically galvanized, Class 55 coating meets the requirements for use in preservative-treated and fire-retardant-treated-wood per the 2012 and 215 IRC
View Details
|
7502131 |
Simpson Strong-Tie Strong-Drive SD SD9112R100 Connector Screw, #9 Thread, 1-1/2 in L, Hex Head, Serr |
9 |
12.99 |
/ BX |
SD9112R100 |
|
|
Simpson Strong-Tie Strong-Drive SD SD9212R100-R Connector Screw, #9 Thread, 2-1/2 in L, Serrated Thr
PRODUCT OVERVIEW
The Strong-Drive(R) SD connector screw is specifically designed to replace nails in certain Simpson Strong-Tie(R) connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie(R) products. In certain applications screws are easier and more convenient to install than nails and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions.
Product Details
Applicable Materials:Wood
Drive Size:1/4 in
Drive Type:Hex
Finish:Galvanized
Grade:Class 55
Head Type:Hex
Includes:Hex Driver
Length:2-1/2
Material:Steel
Package Quantity:100 PK
Point Type:Sharp
Thread Length:1-1/8 in
Thread Size:9
Thread Type:Serrated
Features
Tested and approved for use in many of Simpson Strong-Tie(R) top-selling connectors for both interior and most exterior applications
Ideal for use in connector applications where more control is desired or using a hammer is inconvenient
1/4 in hex head with 0.37 in Dia integrated washer reduces cam-out and is stamped with the Simpson Strong-Tie(R) "a? " sign and the fastener size for easy identification after installation
Shank is specifically designed to match the fastener holes in Simpson Strong-Tie(R) connectors
Optimized heat-treating for ductility and strength
Mechanically galvanized, Class 55 coating meets the requirements for use in preservative-treated and fire-retardant-treated-wood per the 2012 and 215 IRC
View Details
|
7502362 |
Simpson Strong-Tie Strong-Drive SD SD9212R100-R Connector Screw, #9 Thread, 2-1/2 in L, Serrated Thr |
4 |
19.99 |
/ BX |
SD9212R100-R |
|
|
ProFIT 0286078 Screw, #6 Thread, 1-1/4 in L, Coarse Thread, Bugle Head, Phillips Drive, Sharp Point,
Product Details
Use for drywall to wood studs and all-purpose wood fastening.
-Coarse threads provide good holding power in wood
-Buglehead with Phillips drive
Applicable Materials:Drywall
Drive Type:Phillips
Finish:Phosphate
Head Type:Bugle
Length:1-1/4 in
Package Quantity:271 BX
Point Type:Sharp
Thread Size:6
Thread Type:Coarse
Type:All-Purpose
View Details
|
8152084 |
ProFIT 0286078 Screw, #6 Thread, 1-1/4 in L, Coarse Thread, Bugle Head, Phillips Drive, Sharp Point, |
2 |
5.99 |
/ BX |
0286078 |
|
